Technical characteristics

BİZON PVA ADHESIVE

The product description

Bizon PVA adhesive on a polyvinyl acetate basis is applying to gluing of wood, a paper and for improvement of sticky properties of dry filler.

Applied materials

Bizon PVA adhesive is applying to gluing of wood, a paper and also for improvement of sticky properties of dry filler. On application ambient temperature should be in a limit of minimum +5°C and maximum +30°C, relative humidity of air must not exceed 80 %.

Physical properties

Color                          Colorless

The dry residue          21±2

(Weights. %)

G/sm3 density            1.02±2

Shine                          Half matte

Surface condition

Applied surface should be cleared of a dust, oily substances and the rests of an old paint.

Application methods

The brush        Is recommended.

The roller        Is recommended.

Drying time

Drying time depends on weather conditions, the thickness of the applied layer and number of the applied layers. At case of the above listed conditions drying can last from 30 minutes till 2 hours.

Storage conditions

Store in a dry well aired place. Protect from high temperatures and overcooling. Storage period in original packing and at not opened container 2 years.

Mix before using.

Packing types

0.75 kg., 2.5 kg., 8 kg. and 15 kg plastic packing

Safety rules

Before application read the instruction on package. Protect from high temperatures and overcooling. Apply in well aired place. If the paint spills on your skin clear suitable solvent then wash out with soap water. If the paint spills on eyes wash out water in case of need contact the doctor.

Technical characteristics

BİZON PRIME COAT UNIVERSAL

The product description

Bizon prime coat universal on a styrene of acrylic copolymer basis, is steady against a severe climate, provides steadier adhesion and reduces the paint consumption. It is appointed for Bizon Megatex textural systems and for a special figured cover. Owing to special parts of a filler enhances adhesive action of a paint to a surface. Reduces the paint consumption. Easily applied on a surface and generates a matte surface with visible particles of a filler.

Sphere of application

Bizon Universal prime coat is applying on plaster on which surface by using of a spray the component gives a texture. On application ambient temperature should be in a limit of minimum +5°C and maximum +30°C, relative humidity of air must not exceed 80 %. It is necessary to apply a prime coat in 1 layer. Before using prime coat coating it is necessary to equalize a surface. It is desirable to apply Bizon Royaltex filler on an acrylic basis. Dilute prime coat with a maximum of 20 % of water.

Thickness of a film and value of covering area

Physical properties

Color                          White

The dry residue          55±2

(Weights. %)

G/sm3 density            1.33±2

Viscosity                    110±5

Shine                          Matte

Surface condition

Applied surface should be cleared of a dust, oily substances and the rests of an old paint.

Application methods

The brush                    Is recommended.

The roller                    Is recommended.

The paint consumption

1 litre of Bizon universal prime coat covers approximately 15-20 sqm. of surface. This value depends on absorbing properties of a surface.

Drying time

Drying time depends on weather conditions, the thickness of the applied layer and number of the applied layers. In the below-mentioned table are shown approximate time and drying temperature.

- Good ventilation (external works or free air circulation).

- The recommended thickness of a film.

- It is recommended to consider number of applied layers and the thickness of layers accordingly.

Storage conditions

Store in a dry well aired place. Protect from high temperatures and overcooling. Storage period in original packing and at not opened container 2 years.

Mix before using.

Packing types

15 l. plastic packing

Safety rules

Before application read the instruction on package. Protect from high temperatures and overcooling. Apply in well aired place. If the paint spills on your skin clear suitable solvent then wash out with soap water. If the paint spills on eyes wash out water in case of need contact the doctor.

Technical characteristics

BİZON WATERPROOF PAINT

The product description

Bizon waterproof paint prime coat on the elastic copolymer styrene-acrylic basis, shows high firmness to damp environments, provides steadier adhesion and reduces the paint consumption. Owing to high elasticity it is steady to mechanical influence. Easily applied on a surface and generates a flat matte surface.

Sphere of application

It is possible to apply Bizon waterproof paint prime coat on plaster, filler, concrete, alchipan, betopan, etc. On application ambient temperature should be in a limit of minimum +5°C and maximum +30°C, relative humidity of air must not exceed 80 %. It is necessary to apply a prime coat in 1 layer. Dilute prime coat with a maximum of 10 % of water.

Thickness of a film and value of covering area

Physical properties

Color                          White

The dry residue          55±2

(Weights. %)

G/sm3 density            1.37±2

Viscosity                    110±5

Shine                          Matte

Surface condition

Applied surface should be cleared of a dust, oily substances and the rests of an old paint.

Application methods

Spray                          Can be applied by vacuum dispersion.

The brush                    Is recommended.

The roller                    Is recommended.

The paint consumption

1 litre of Bizon waterproof paint prime coat covers approximately 15-20 sqm. of surface. This value depends on absorbing properties of a surface.

Drying time

Drying time depends on weather conditions, the thickness of the applied layer and number of the applied layers. In the below-mentioned table are shown approximate time and drying temperature.

- Good ventilation (external works or free air circulation).

- The recommended thickness of a film.

- It is recommended to consider number of applied layers and the thickness of layers accordingly.

Storage conditions

Store in a dry well aired place. Protect from high temperatures and overcooling. Storage period in original packing and at not opened container 2 years.

Mix before using.

Packing types

2.5 l, 7.5 l. and 15 l. plastic packing

Safety rules

Before application read the instruction on package. Protect from high temperatures and overcooling. Apply in well aired place. If the paint spills on your skin clear suitable solvent then wash out with soap water. If the paint spills on eyes wash out water in case of need contact the doctor.

Technical characteristics

BİZON ROYALTEX

The product description

Bizon Royaltex filler on a styrene of acrylic copolymer basis for filling of roughness and defects of a surface.

Scope

Bizon Royaltex filler can be applied on plaster, concrete, wood, alchipan, betopan, etc. On application ambient temperature should be in a limit of minimum +5°C and maximum +30°C, relative humidity of air must not exceed 80 %. Apply without diluting. At spray type of application dilute with 10 % of water.

Thickness of a film and value of covering area

Physical indicators

Color                          White

The dry residue          79±2

(Weights. %)

G/sm3 density            1.80±2

Surface condition

Applied surface should be cleared of a dust, oily substances and the rests of an old paint.

Application methods

Spray                          Can be applied by vacuum dispersion.

The brush                    Is recommended.

The roller                    Is recommended.

The paint consumption

1 kg of Bizon Macun covers approximately 1-1.5 sqm. of surfaces. This value depends on absorbing properties of a surface.

Drying time

Drying time depends on weather conditions, the thickness of the applied layer and number of the applied layers. In the below-mentioned table are shown approximate time and drying temperature.

- Good ventilation (external works or free air circulation).

- The recommended thickness of a film.

- It is recommended to consider number of applied layers and the thickness of layers accordingly.

Storage conditions

Store in a dry well aired place. Protect from high temperatures and overcooling. Storage period in original packing and at not opened container 2 years.

Mix before using.

Packing types

4 kg, 10 kg and 25 kg plastic packing.

Safety rules

Before application read the instruction on package. Protect from high temperatures and overcooling. Apply in well aired place. If the paint spills on your skin clear suitable solvent then wash out with soap water. If the paint spills on eyes wash out water in case of need contact the doctor.

Technical characteristics

BİZON ROYALPLUS TURBO

The product description

Bizon Royalplus Turbo is high quality water emulsion paint on a styrene of an acrylic copolymer basis for internal works, is steady against action of washing surface active substances. Possesses high coverability, easily applied on a surface and generates a flat surface. Is produces matte, silky-matte modifications.

Sphere of application

Bizon Royalplus Turbo can be applied on plaster, filler, concrete, alchipan, betopan, on fibre-wallpaper, etc. internal walls. On application ambient temperature should be in a limit of minimum +5°C and maximum +30°C, relative humidity of air must not exceed 80 %. Dilute a maximum of 10 % with water.

Thickness of a film and value of covering area

Physical properties

Color                          Can be painted in different colors by using pastes on a water basis

The dry residue          60±2 (Matte), 52±2 (is silky-matte)

(Weights. %)

G/sm3 density            1.60±2 (Matte), 1.35±2 (silky-matte)

Viscosity                    100±5

Shine                          Matte, silky-matte

Surface condition

Applied surface should be cleared of a dust, oily substances and the rests of an old paint.

Application methods

Spray                          Can be applied by vacuum dispersion.

The brush                    Is recommended.

The roller                    Is recommended.

The paint consumption

1 litre of Bizon Royalplus Turbo covers approximately 15-20 sqm. of surfaces. This value depends on absorbing properties of a surface.

Drying time

Drying time depends on weather conditions, the thickness of the applied layer and number of the applied layers. In the below-mentioned table are shown approximate time and drying temperature.

- Good ventilation (external works or free air circulation).

- The recommended thickness of a film.

- It is recommended to consider number of applied layers and the thickness of layers accordingly.

Storage conditions

Store in a dry well aired place. Protect from high temperatures and overcooling. Storage period in original packing and at not opened container 2 years.

Mix before using.

Packing types

2.5 l., 7.5 l., and 15 l. plastic packing

Safety rules

Before application read the instruction on package. Protect from high temperatures and overcooling. Apply in well aired place. If the paint spills on your skin clear suitable solvent then wash out with soap water. If the paint spills on eyes wash out water in case of need contact the doctor.